Asian Safety Services
TEL : +601-9262 5920 , +603-5518 1070 .  FAX : +603-5512 6315
SDN BHD
Company No.  781962 - T
Product by : Detcon
"Detecting
the Difference"
 
D1003a.    






Copyright © 2013 by: AsianSafetyServices.com  ·  All Rights reserved  ·  E-Mail: mike-lacy@asiansafetyservices.com

SmartWireless Technology
Site Sentinel
The Most Advanced Stand-alone Gas Detection Safety System
Transportable. Lightweight. Rugged.
Features
• Wireless/Cordless® design
• Network capacity up to 32 devices
• Line, battery, solar, and solar/battery power options
• Wired and/or wireless configuration options
• Environmentally bulletproof CXT sensors for detecting toxic and combustible gases


SmartWireless®
Model Series CXT Gas Detection Sensor Assembly
Features
• Detcon Model self healing mesh network topology
• Universally accepted 2.4 GHz non-licensed frequency
• Low power gas detection sensors with built-in transceivers
• Built-in display for gas sensor/field device HMI
• Disposable battery packs
Description
Features
• Low Power Gas Detection Sensors
• Built-in Display
• Class I, Div. 1, Groups B, C, & D
• Non-intrusive Magnetic Interface
• Built-in Diagnostics
• Fully Encapsulated Electronics
• Electropolished 316SS Construction
• Quick Thread Release (for sensor replacement)
Description
SmartWireless Site Sentinel CXT Controller
Alarm & Control System
HMI Panel
Features
• Compatible with Detcon RXT & CST Tranceivers
• 32 channel capacity panels
• Real time 4 line 40 character LCD
• Field device status and location tag
• Alarm condition LEDs and optional strobe & horn
• Non-intrusive operator interface
Description
SmartWireless Site Sentinel CX Controller
Alarm & Control System
HMI Panel
Features
• Compatible with Detcon RXT transceivers
• Up to 4 wired gas detectors
• Optional strobe & horn
Description
SmartWireless®
Audio Visual Alarm Station
RD-8X
Features
• Up to 6 hours continuous operation in full alarm
• Up to 6 months continuous operation - no alarm
• Smart rechargeable battery packs with integral safety circuitry
• Optional solar charging panel
Description
Battery Options
for Wireless Applications
RD-8X
Features
• High Energy Lithium Ion Technology
• Rechargeable & Replaceable/Disposable Options
• Industry Leading Run Times
Description
High energy battery packs are a necessary component in the application of any SmartWireless® gas detection system. Detcon provides several options when selecting the optimal battery back for your application. These options include rechargeable packs as well as packs with disposable/replaceable batteries. Both use lithium ion technology and are available in low and high capacity versions. While others may specify battery run times of weeks or even days, Detcon battery packs typically provide continuous run times for months at a time. Paired with a solar charging option Detcon SmartWireless® system components can provide indefinite run times. The battery packs are packaged as a plug in module that uses a mechanical guide and large surface area gold plated mating connectors. A smaller compact version is packaged with a twist-lock design. Both are housed and secured inside a Division 1 enclosure. Optional solar charging panels are available in Class I, Div 1 and Class I, Div 2 packages. Integrated safety circuitry continuously monitors each battery pack. If the discharge current exceeds the battery rating the output will be turned off until reset. If the voltage drops below operating levels the output will be turned off until the battery is recharged (rechargeables) or replaced (replaceables). Rechargeable packs are also protected from over voltage during charging.
Model RXT-300/RXT-320
SmartWireless® Transceiver
Wireless Transceiver
Features
• Universally Acceptable Frequency 2.4 GHz
• Network Wide Control Processing Capability
• Low Power Requirement
• 1-2KM Line-of-Sight Range (with external directional antenna)
• Robust Mesh Network Topology
• Network Capacity up to 32 Devices
• Flexible I/O options

Description
Detcon Model Series RXT-300 and 320 SmartWireless® transceivers are ideal for transmitting signal data in a wide range of industrial detection and alarm system applications. Both transceivers operate at a universally accepted frequency of 2.4 GHZ and are able to transmit signal data from 4-20 mA DC or serial MODBUS inputs. Wireless installations eliminate the cost of point-to-point wiring and can be as simple as a single field device communicating with a controller, or as complex as 32 field device nodes forming a seamless network with a controller, remote display, and audio/visual alarm stations. Sixteen nodes can be installed in close proximity to one another creating a plant wide network of up to 512 field devices. Wireless network integrity, security, and reliability are accomplished using direct sequence spread spectrum wireless mesh technology. Every device in the network is capable of functioning as a router and repeater for all other devices in the network. This means that subscribers can “hop” through neighboring devices to communicate with each other, thus widening network access points. This innovative technology creates a robust network that automatically routes around congestion and RF line-of-sight obstacles. Throughput improves as device density increases. While the Model RXT-320 transceiver encompasses all these advanced mesh-networking capabilities, the Model RXT-300 is designed with an additional and unique innovation in self-healing mesh networking. Unlike conventional mesh networks, the Model RXT-300’s processing power is shared among all network devices. The RXT-300 is able to automatically select another transceiver in the network to take over as the master device, should the designated master transceiver fail. As a result, the RXT-300 does not depend on a single controller to maintain network operation. This feature significantly enhances the redundancy and overall safety level of the wireless system.
SmartWireless®
Configuration Tool
Features
• 10.1” Touch Panel LCD
• Interfaces with USB Wireless Radio
• Battery Operates up to 8 Hours
• 2 Hour Charge Time
Description
SmartWireless®
Model SW-X40-32 Master Control Panel
HMI Panel
Features
• Compatible with Model RXT-320 Tranceivers
• 32 channel capacity panels
• Real time 4 line 40 character LCD
• Field device status and location tag
• Alarm condition LEDs
• Non-intrusive operator interface
Description
Model Series SPS-00W-xx
Solar Power Supplies
RD-8X
• Model SPS-01W-DV1 - lithium ion,10AH, 1.5 Watts
• Model SPS-10W-GP - lead acid, 18AH, 10 Watts
• Model SPS-20W-GP - lead acid, 18AH, 20 Watts
• Model SPS-40W-DV2 - lead acid, 36AH, 40 Watts
Description
MORE INFO
Detail & Order


Site Sentinel

SmartWireless®
Technology


MORE INFO


Data Sheets

CXT-IR Infrared LEL SmartWireless®
Sensor Assemby



CXT-DM-O2 Oxygen SmartWireless®
Sensor Assemblies



CXT-DM Toxic SmartWireless®
Sensor Assemblies
MORE INFO

Data Sheets

CX-IR Infrared LEL
Sensor Assemby



CX-DM Toxic
Sensor Assemblies



Instruction Manual

CX-IR Detector


MORE INFO

Data Sheet

SmartWireless®
Site Sentinel CXT Controller



Instruction Manual

CXT Controller

MORE INFO

Data Sheet

SmartWireless®
Site Sentinel CX Controller



Instruction Manual


CX Controller

MORE INFO

Data Sheet

SW-AV1-DV2
Class I; Div 2
Audio Visual


SW-AV2-DV2
Class I; Div 2
Audio Dual Visual


SW-AV1-DV1
Class I; Div I
Audio Visual



Instruction Manual


SmartWireless®
Audio Visual
Alarm Station Div2


SmartWireless®
Audio Visual
Alarm Station Div1


MORE INFO

Data Sheet


RXT-300
SmartWireless®
Transceivers


RXT-320
SmartWireless®
Transceivers


Instruction Manuals

RXT-300
RXT-320

Approvals

RXT-300 & RXT-320
Intertek Certificate


MORE INFO

Data Sheet

SmartWireless®
Configuration Tool

Instruction Manual

SmartWireless®
Configuration Tool


MORE INFO

Data Sheet


SmartWireless®
Master Control Panel



Instruction Manual

SmartWireless® HMI (320 Mesh)


SmartWireless® HMI (300 Fault Tolerant)
 
MORE INFO


Data Sheet

SPS-00W-xx
Solar Power
Supplies





Detcon Model CXT are SmartWireless® gas detection sensors designed for use in mobile applications in heavy industrial environments. These low power sensors assemblies utilize one of two technologies and cover a wide range of industrial applications; electrochemical for a long list of toxic gases, infrared for combustible hydrocarbons. All component parts are rated for Class 1; Division 1, Group C, D hazardous areas. These advanced field devices consist of a Detcon Model Series CXT low power gas detection sensor, and wireless transceiver packaged in a single enclosure. Power is provided by a disposable "C" cell battery pack capable of continuous operation for greater than 60 days. Additional power options include a Smart Rechargeble battery with a run time of 5-6 months, a disposable "D" cell battery pack with a run time of 9 months and solar panel providing continuous operation






Detcon Model CX-DM gas detection sensors are easily and economically deployable in both permanent and temporary installations. These low power sensor assemblies utilize electrochemical technology for a long list of toxic gases. Model CX-DM sensors are equipped with standard analog 4-20mA, and Modbus™ RTU RS-485 outputs and can be used with Detcon’s SmartWireless® Site Sentinel CX/CXT Controllers as well as other Detcon control systems
Detcon Site Sentinel CXT Controller is a SmartWireless® gas detection and control system that provides operator interface to the network and real time status display of all network devices. The Sentinel CXT is compatible with Detcon’s Model RXT and CXT Transceivers. Flexible and expandable, a Site Sentinel network can include up to 32 devices and consist of any combination of wireless and/or wired sensors, one or more Site Sentinel control panels, and alarm warning devices.

Command functions include alarm reset, alarm acknowledge, alarm test and radio silence. In normal operation the control panel provides real time display of gas concentrations or the status of other field devices; battery charge levels, network RF signal quality and any number of fault diagnostic conditions affecting either an individual field device or the entire network. These fault conditions are displayed on the control screen.

Options include audio alarm, visual alarm, external alarm port, alarm reset switch and up to 4 external wired sensor inputs. Standard features include a power-in port and power switch.

The control panel is rated for Class 1, Division 2; Groups A, B, C, D hazardous areas. Operator interface is non-intrusive via magnetic contact switches located behind the glass lens cover. This advanced design takes advantage of a low power LCD with back light and ultra low power components. Power is provided by an internal rechargeable battery and/or 11.5 to 30VDC. Operating time is 1-2 months before recharge is required. An optional solar charging panel can be used to extend operating time for virtually any application.
Detcon SmartWireless® Site Sentinel CX Controller is is an accessory to the SmartWireless® CXT and is easily and economically deployable in both permanent and temporary installations. The CX wirelessly transmits the data from up to 4 wired gas detectors back to the CXT and includes a battery that powers the radio, alarm devices, and the attached sensors. The Sentinel CX is compatible with Detcon’s Model RXT transceivers. Flexible and expandable, a Site Sentinel network can include up to 32 devices and consist of any combination of wireless and/or wired sensors, one or more Site Sentinel control panels, and alarm warning devices.

Options include audio alarm, visual alarm, external alarm port, and up to 4 external wired sensor inputs. Standard features include a power-in port and power switch.

The control panel is rated for Class 1, Division 2; Groups B, C, D hazardous areas. Power is provided by an internal rechargeable battery and/or 14 to 30VDC. Operating time is 1-2 months before recharge is required. An optional solar charging panel can be used to extend operating time for virtually any application.
Detcon SmartWireless® audio-visual alarm stations are easily and economically deployable in both permanent and temporary installations. These devices feature a battery powered audio visual alarm station designed as a wireless cordless system component. They are rated for Class 1; Division 1, Groups C, D hazardous areas and Class I; Division 2, Groups A, B, C, D.

Power is provided by a Detcon designed smart battery pack eliminating the requirement for power or signal cables (line power option available). The standard rechargeable battery packs are capable of delivering enough energy for 4-6 hours of continuous operation in a full alarm condition or 5-6 months (no alarm condition). The standard rechargeable battery pack continuously reports its charge level and estimated operating time before recharge or replacement is required. An optional solar charging panel can be used to extend operating time and maintain full battery charge levels for virtually any application. An optional disposable “D” cell battery pack is capable of delivers even longer operating times.

Alarm relay options include adjustable set points and latching/non-latching relays. The audible alarm can be configured for acknowledge/silence via operator interface at the SmartWireless CXT Controller.
The RXT Wireless Configuration Tool is a custom device designed to configure Detcon’s RXT-300 and RXT-320 SmartWireless™ transceivers. It is used to set the RF Channel, Network ID and to configure RXT-300 wireless networks.
Detcon SmartWireless® gas detection systems include an optional 32 channel Master Control Panel that provides operator interface to the network and real time status display of all network devices. The Master Control Panel is compatible with Detcon’s Model RXT-320 Transceivers. Command functions include setting of alarm levels, number of active channels, gas type, range, alarm reset, alarm acknowledge, alarm test and radio silence. In normal operation the Master Control Panel provides real time display of gas concentrations or the status of other field devices; Smart Battery charge levels, network RF signal quality and any number of fault diagnostic conditions affecting either an individual field device or the entire network. These fault conditions are displayed on the control panel screen. The wireless control panel is rated for Class 1; Division 1, Groups C, D and Class 1, Division 2; Groups A, B, C, D hazardous areas. Operator interface is non-intrusive via magnetic contact switches located behind the glass lens cover. This advanced design takes advantage of a low power LCD with back light and ultra low power components that extend operating time for 1-2 months before recharge is required. Like all other Detcon SmartWireless® system components, power is provided by Detcon’s Smart Battery Pack. An optional solar charging panel can be used to extend operating time for virtually any application.
Detcon Model Series SPS are self contained, pre-assembled 12 VDC solar power supplies designed specifically for heavy industrial applications. Each system consists of a rechargeable battery, solar energy panel and a battery controller-charge circuit designed to supply continuous DC power sufficient enough to operate a wide range of industrial automation products. Gas detection sensors, process measurement devices, remote data acquisition systems and audio visual alarm stations are just a few examples. These pre-assembled solar power supplies (SPS) are available in 4 different power levels with one rated for use in Division 1 electrically classified areas, one for Division 2 locations and 2 for general purpose non-hazardous locations.

Model Series CX Gas Detection Sensor Assembly
 
Home
Product
Project
Contac Us
About Us
Catalog
AGENT OF