Gas Detectors
Detcon manufactures the most rugged and diverse fixed gas detection sensors for a wide range of industrial applications… the Model 700, MicroSafe™ Models 500/600, and the Model 100. The Model 700 is a state-of-the-art intelligent sensor specifically designed for harsh environments and extreme locations, Models 500/600 feature Detcon's MicroSafe intuitive software, and the Model 100 is a back-to-basics high quality, low power, no frills gas detection sensor. All Detcon sensor assemblies are designed as easy-to-use field replaceable plug-in sensors with intelligent electronics and a non-instrusive operator interface.
Detcon
Model Series 700 Gas Detection Sensors
"Environmentally Bulletproof"
• Water-Proof
• Corrosion-Proof
• Vibration-Proof
• Multi-Layer Surge Protection
• Pre-emptive Fault Diagnostics
Model 700 Sensors
Detcon Model Series 700 industrial gas detection sensors are a new generation of intelligent sensor modules that incorporate and integrate several leading edge improvements. The sensors are specifically designed for harsh and extreme locations. This new and superior level of environmental durability in sensor design includes an electropolished 316 stainless steel housing, multi-layered transient spike protection circuitry and 100% encapsulated electronics. The sensor electronics are completely protected and immune to water ingress and corrosion. The gas detector sensor elements are all plug-in components and can easily be replaced in the field. Operator interface is non-intrusive via a small handheld magnet. Configuration and routine calibration is intuitive and menu driven with fully scripted instructions. Sensor status is displayed on a built-in alphanumeric LED display. Model Series 700 intelligent sensor modules feature dual redundant outputs, a linear 4-20 milliamp analog signal and a Modbus RS-485 serial output.
Electrical Classification (FP, TP, IR Series)
Class I, Div 1, Groups B, C, D; Class I, Zone 1, Group IIB+H2 (ATEX)
Electrical Classification (DM, O2, PI Series)
Class I, Div 1, Groups A, B, C, D; Class I, Zone 1, Group IIC (ATEX)
Safety Approvals
CSA/NRTL (US OSHA Certified)
ATEX
Integration Solutions Include:
• Remote Control/Alarm Relay Module
• Hart Module
• Profibus Module
• Foundation Fieldbus Module
• Wireless Interface Module
Detcon
MicroSafe™ Gas Detection Sensors
"Intuitive Diagnostic Intelligence"
• Intuitive Non-intrusive Operator Interface
• Modular Plug & Play Sensors & Transmitters
• Simple Menu-driven Calibration &        Programming
• Integral Sensor Fault Diagnostics
Two Models to Choose From
• Model 500: 4-20mA
• Model 600: 4-20mA, Modbus RTU, Alarm Relays
Microsafe Gas Detectors
Detcon MicroSafe™ Series

intelligent gas detection sensors feature Detcon's MicroSafe™ intuitive software. Operator interface is non-intrusive using a hand-held magnet and program switches accessed through a glass lens cover. Calibration instructions appear in simple interactive and sequential script on a 16-character backlit alphanumeric display. The transmitter design incorporates extensive fault diagnostics with each condition conveniently identified on the transmitter display. The gas detector sensor elements and transmitters are plug-in components and can easily be replaced in the field.

Model Series 500 comes standard with a linear 4-20 mA output, one-man remote calibration, self-adjusting zero and span, and LED indicators for fault and calibration status.

Model Series 600 includes the same features as the 500 with the addition of 3 alarm relays and an RS-485 serial communications port.

Electrical Classification - Explosion proof
Class I, Div 1, Groups B, C, D

Safety Approvals
cCSAus/NRTL (US OSHA Certified)
ATEX (TP Series Solid State H2S only)
Detcon
Model 100 Gas Detection Sensors
"Simple, Affordable, Durable"
• 2-Wire Loop Powered
• Wide Range of Toxic Sensors + Oxygen
• XP-Intrinsically Safe design
• Non-Intrusive Interface
• 4-20 Milliamp Output
• Class I, Division 1, Groups B,C,D
• Integral Sensor Fault Diagnostics
• Fully encapsulated electronics
Gas Detectors
Detcon Model 100 Series sensors feature intelligent electronics, non-intrusive operator interface and comprehensive fault diagnostics. The sensor is packaged in an electro-polished 316 stainless steel housing fitted with a ¾ inch NPT thread. The plug-in, field replaceable sensor features large surface area gold-plated pins that reduce the effects of corrosion in harsh industrial environments. Signal conditioning electronics are completely encapsulated in the sensor housing adding a high level of durability to the design. The packaging is Explosion Proof (Class I, Div. 1 Groups B, C, D). Model 100 is equiped with a standard analog 4-20 mA current signal equivalent to the sensor range of detection. Upper enclosure options are aluminum and stainless steel (includes a transient protection terminal board). Additional accessories include wireless communications, a loop powered digital display, Remote Alarm Module (RAM), HART, and a current to RS-485 converter. The standard serial converter is Modbus RTU. Each sensor is shipped with a splash guard with integral calibration port.
Model DM-100 provides a wide range of toxic gas sensors and oxygen that uses electrochemical technology.

Electrical Classification
NEMA 4X Class 1, Div. 1, Groups B, C, & D

Safety Approvals
cCSAus/NRTL (US OSHA Certified)
ATEX
CE Marking

 
 
 
Asian Safety Services
TEL : +601-9262 5920 , +603-5518 1070 .  FAX : +603-5512 6315
SDN BHD
Company No.  781962 - T
Product by : Detcon
MORE INFO
Detail & Order


Data Sheets


Solid State H2S
Chemfet MOS (TP)


Combustilble Gas
Catalytic Bead (FP)

Combustible
Hydrocarbons
Infrared (IR)


Carbon Dioxide CO2
Infrared (IR)

Toxic Gases
Electrochemical (DM)


Oxygen Deficiency (O2)

VOCs
Photo Ionization (PI)
Fixed Gas Sensors
"Detecting
the Difference"

 

MORE INFO

Data Sheets

Toxic, Oxygen


Other Documentation

Instruction Manual

Engineering
Specification Sheets


Approvals
& Certifications






Copyright © 2013 by: AsianSafetyServices.com  ·  All Rights reserved  ·  E-Mail: mike-lacy@asiansafetyservices.com
MORE INFO

Data Sheets


MultiFlame DF-TV7-T
Triple IR


MultiFlame DF-TV7-V
UV/Dual IR




MultiFlame
Flame Detectors
• Continuous auto-check of optical lens
• Selectable sensitivity and time delays
• Wireless detector configuration and testing using TLU
• HART® output option available
Two Models to Choose From
• DF-TV7-T: Multi-spectrum IR Flame Detector (3 wavelengths)
• DF-TV7-V: Multi-spectrum UV/2IR Flame Detector (UV + dual IR)
Flame Detectors
The MultiFlame DF-TV7-T is a multi-spectrum infrared flame detector using three wavelengths to respond to hydrocarbon fires and is the right choice for operation in dirty environments or for detection of smoky fires.The MultiFlame DF-TV7-V is a combined ultraviolet/infrared flame detector offering excellent long range detection. Both maintain outstanding false alarm immunity, are suitable for use in SIL2 applications and are configurable using a hazardous area approved wireless hand held terminal (TLU).
Electrical Classification
II 2 G Ex d II C T6 Gb (-40°C to +65°C)

Safety Approvals
SIL (pending)
ATEX
CE Marking (pending)

MORE INFO

Data Sheets

GD10L Open Path
Hydrocarbon Detector



GD10L Open Path
Infrared Hydrocarbon Detector
15 Year IR Sources Warranty
• Enhanced coverage requires fewer devices
• Ultra stable & long life solid state IR sources
• Heated retro reflector minimises icing and condensation
• Path lengths from 6.5 to 100 feet
Flame Detectors
The GD10L provides an effective response to the detection of gas hazards in a wide range of industrial environments from boiler plant rooms to offshore petrochemical installations.
Electrical Classification
ATEX 2 II G EExde IIC T6 (-40°C to +65°C)

Safety Approvals
ATEX

MORE INFO

Data Sheets

GD1 Laser Open Path
H2S Gas Detector



GD1 Laser Open Path
H2S Gas Detector
Fastest Possible Speed of Response
• No sensor recalibration or replacement
• Superior detector stability and specificity
• Suitable for use in SIL 2 systems
Flame Detectors
The GD1 sets a new standard for toxic gas detection. Using a tuneable laser diode the GD1 delivers enhanced coverage and fail safe detection. The performance improvement marks a genuine step change for safety systems and life cycle cost savings. At the heart of the detector is a tuneable laser diode that eliminates environmental effects from sun, rain and fog. The laser scans single absorption lines where there is no interference from other gases. Unlike traditional methods for detecting H2S (MOS or EC cell) the GD1 needs no recalibration and can replace multiple standard detectors to cover the same risk.
Electrical Classification
Ex II 2 G Ex e IIC T4/T5/T6

Safety Approvals
ATEX
SIL




Quantity:
Order request
Quantity:
Order request
Quantity:
Order request
Quantity:
Order request
Quantity:
Order request
Quantity:
Order request
 
D1001a.    
 
Home
Product
Project
Contac Us
About Us
Catalog
AGENT OF

MORE INFO
Detail & Order


Solid State H2S
Chemfet MOS (TP)

TP-524D
TP-624D

Combustilble Gas
Catalytic Bead (FP)

FP-524D
500HT High Temp
600HT High Temp
FP-624D

Combustible
Hydrocarbons
Infrared (IR)

500 600

Carbon Dioxide CO2
Infrared (IR)

500 640 642

Toxic Gases
Electrochemical (DM)


Oxygen Deficiency (O2)
500 600